CONE FILTERS
Les filtres coniques sont principalement utilisés pour la séparation liquide/solide. Nous proposons des filtres coniques pour applications liquides ou gaz (LNG, Oxygène, huiles, eaux usées…).
Your custom-made filters:
DEMISTER® Fog Eliminator is a knitted YORKMESH mesh assembly that is supported by high open area grids.
DEMISTER mist eliminators are manufactured in all sizes and shapes from a wide range of materials, both metallic and non-metallic/plastic.
Stainless and exotic steels are fully annealed to provide maximum corrosion resistance.
Based on years of actual factory performance, our engineers use special families of mesh styles for particular equipment and processes to meet customer efficiency requirements.
Operation of a DEMISTER® fog eliminator:
01
A stream of vapor carrying liquid droplets in suspension passes through a DEMISTER PAD. Steam moves freely through the knitted mesh.
02
The inertia of the droplets causes them to contact the surfaces of the wires and coalesce.
03
The large merged droplets formed in the mesh, eventually flow out and fall to the bottom of the container.
The comparative pressure drop of several DEMISTER® mist eliminators in an air-water system at atmospheric conditions.
Characteristics
- Easy to install in all process equipment
- Cost effective solution when sizes are defined by other requirements
- High efficiency with low pressure drop
- Rush delivery available
- Wide variety of materials available
COALESCER
Consisting of liquid-liquid and liquid-gas phase separators: the fluid passes over a bed with graduated porosity to fuse the particles of their initial microscopic size until they form droplets which are detached by gravity.
If the density of the fluid to be separated is greater than that of the carrier medium, the collector is located in the lower part of the filter body. Otherwise, the collection chamber is located in the upper part of the body.
Their excellent performance in separation and filtration (99.9%) and their ability to adapt in flow rate make the coalescers ideal for many applications, for the separation of free or emulsified water.
They have particular applications for the protection of gas turbines.
